2. Attach Medium Crystal Chenille at rear end of shank, over tail wrap. (Fig. 3)

3. Wrap chenille forward, covering tail wraps. Don't crowd eye! (Fig. 4)

4. Cut Foam: 1/2" x 2 6/8". Cut a strip 1/8" on each side, to be tapered from the point where if is attached at the rear end of the shank. (Fig. 5&6)

5. Attach foam to shank at chenille tie-off point. (Fig. 7)

6. Tie in small clump of red Flashabou.

7. Clip thread and retie thread at rear end of shank/chenille.

8. Pull Foam back and tie off at rear end of shank/chenille. Secure wrap, finish and clip. (Fig. 8&9)

9. Tie in Red Thread. Pull foam forward and tie down in front of previous ties, just behind the eye. Make sure that both layers of foam are centered over hook shank. There should be approx. 1/4"-3/8" of foam extending over the eye. Tie down foam to hook. (Fig. 10)

10. Tie in a small loop of 18 lb. mono, to support foam head, so that it lays on the back of the head. (Fig. 11)

11. Option: Fill underside with Softex or Goop, for durability. Add a thin film on back of bug. Shape head round, or oval. (Fig. 13)