Re: Boat gas issues

[Bulletin Board]

Posted by Jim J. on 2013-09-05 23:34:10 in reply to Boat gas issues posted by Bob Fabini on 2013-09-05 22:46:50

Carefully, pull back on the filler seal collar on the pump nozzle exposing more of the nozzle. Holding it back will prevent the back pressure from shutting off the flow. Be careful of over flow and keep the nozzle in contact with the filler tube. You don't want a spark for obvious reasons. Do this at your own risk! This is what I do when filling my 5-gallon fuel cans.

Follow ups:

Post a Followup:


Use the space below to compose your message: